This page includes parts and equipment for sale.
The parts are listed in descending order by boat length and year. If you have
parts or equipment you wish to sell, please see the guidelines for posting
advertisements.
Click on the following links to go to the section you're interested in.
I'll not charge any fee or commission, because
I'm doing this as a service to the Chrysler Sailing Community at large.
This site is intended for you, the Chrysler Sailor (or wannabe), and all
recommendations for improving this site are welcome!
Chrysler Sails for Sale
- Year:
- Location: Florida
- Features: Super Sailmakers has been making a relatively large number
of Chrysler sails each year for the last 15 years or so, and we understand
about the scarcity of sailmakers for Chrysler sailboats. We are happy to assist
the Chrysler sailing community.
The sails listed below are crafted by Super Sailmakers. Super Sailmakers
are also the Florida area's Doyle and Hood loft.
C-13 Pirateer Main $372
C-13Pirateer Jib $163
C-15 Man-O-War $369
C-15 Mutineer Main $369
C-15 Mutineer Jib $201
C-18 Buccaneer Main $395
C-18 Buccaneer Jib $235
C-20 Main (1 reef) - Call for Price
C-20 Genoa (110%) - Call for Price
C-22 Main (1 reef) $624
C-22 Genoa (110%) $467
C-26 Main (1 reef) $734
C-26 Genoa (110%) $575
Prices are for white sails. Colors are available at additional cost.
Shipping not included. Prices may change -- check
http://www.SuperSailmakers.com
for latest pricing.
- Price: See above
- Contact: Bob Meagher, Super Sailmakers
- Phone: 800-541-7601
- E-mail: Bob3@Sail-Depot.com
- Photo:
Chrysler Canvas Products for Sale
- Year:
- Location: Michigan
- Features: As a cost conscious small boat sailor myself, I would like
to offer my services to Chrysler Sailboat Owners. I make beautiful quality
mainsail covers, tiller and winch covers, and other miscellaneous canvas
accessories for fellow sailboaters. I do not have my own website, but
have a long list of very happy customers who get a lot of canvas for a fraction
of the cost of large sail/canvas lofts.
Mainsail Covers only $12.95 per foot! Beautiful construction, using the best
Sunbrella, YKK zippers, and Dot fasteners. Special promotional offer includes a
matching tiller cover for only $9.00 each with the purchase of your new mainsail
cover. Please contact: Maureen Sievertson
for personal attention and more information on our covers.
- Price: See above
- Contact: Maureen Sievertson, Harbor Sail Service and Covers
- Phone: 231-536-7942
- E-mail: hssc@voyager.net
- Photo:
Chrysler Wood Products for Sale
- Year:
- Location: Southern Middle Tennessee
- Features: My name is Tom, a Chrysler owner, and also a woodworker.
I have replaced many of the parts on my C-22. I have made a new tiller --
mahogany and red oak. It looks a lot better than the 'axe handle' that came
standard on the boat. Having the right tools has made the process of replacing
the old windows easier, too. I replaced the windows with smoked plexiglass.
It looks great!
I feel I can measure and make many of the parts that are on our boats and
ship them around to those in need. Here are the items that I think I can make
and ship. I have tried to keep the prices as low as I can.
Tables: Tables: These tables will be ready for you to take the
fitting off the old table and re-attach to the bottom of this one. They will
be protected with polyurethane. There will be an accent strip in them, too.
Photo: C-22 Table in Boat
Photo: C-22 Table: Old vs. New
Oak : |
$175.00 |
Cherry: |
$195.00 |
Birch: |
$150.00 |
Tillers: These can be made from almost any wood. The one I made was
from mahogany and red oak. It too will be finished and ready to install.
Photo: Close-up of C-22 Tiller
Miscellaneous Parts: These can be made from almost any wood. These
too will be finished and ready to install. (Pictures to follow.)
Interior side trim: |
5pcs. |
$80.00 |
mahogany |
Light trim: |
TBD |
$15.00 |
TBD |
Seat hatch covers: |
4pcs |
$50.00 |
TBD |
Motor mount: |
TBD |
$35.00 |
unfinished |
Forward hatch cover: * |
TBD |
$265.00 |
TBD |
* I think I can do this one, too. I just need to make
a prototype of it for my boat.
- Price: All these prices are WITHOUT shipping. If you live in TN, sales tax will
be added to the order.
- Contact: Tom Gillard
- Phone: 805-985-6611
- E-mail: gillardj@cafes.net
- Photo:
Chrysler Teak Products for Sale
- Year:
- Location: Bangkok, Thailand
- Features: Manufacturer of superior teak yacht fittings, marine woodwork
and teakwood boating furniture since 1972. Custom teak woodwork a specialty -
catalog online - order online - quality guaranteed. Visit our website @
http://www.thaiteakmarine.com.
- Price: E-mail or fax for a price quote
- Contact: Donald L. Petrie ("Pete"), Thai Teak Marine Co., Ltd.
- Phone: (66 2) 933 0574-5 Fax (66 2) 933 1296
- E-mail: pete@thaiteakmarine.com
- Photo:
Brand New Rudder for a C-26 SOLD
- Year:
- Location: Chesapeake, Virginia
- Features: For Sale: BRAND NEW RUDDER for a Chrysler 26 sailboat!
It's never even been on a boat and is still shiny white fiberglass! This is
only the rudder, not the shaft/cheek plate assembly; but since this is a common
problem part on the C-26 you might want a new original Chrysler part to replace
a broken/deteriorated one. I found this brand new, original Chrysler C-26 rudder
in the garage of a man who was the local Chrysler dealer many years ago. Make an
offer if you're interested.
- Price: Best offer
- Contact: Raleigh Martin
- Phone: 540-465-8473 or cell phone 540-288-7154
- E-mail: raleigh.martin@netzero.net
- Photo:
C-26 Mast, Boom & Rudder SOLD
- Year: 1977
- Location: Central East Coast of Florida
- Features: For Sale: C-26, 1977 model Mast, Rudder (swing type) and
Boom. I don't know what price to charge; make an offer.
- Price: Best offer
- Contact: Harris Hickman
- Phone:
- E-mail: hhickman@brevard.net
- Photo:
C-26 Genoa SOLD
- Year: 1985
- Location: Huntingtown, Maryland
- Features: I have a 135% race-prepped genoa that has rarely been used.
It was made by Sails USA in Portland, Maine and comes complete with a sailbag.
Here are the specifications: 210 square feet, 5.0 ounce dacron, brass hanks,
leech line, foot line, 3 pairs of tell-tales, 2 pairs of tell-tale windows
(lower and middle), and draft stripe. This sail is in excellent condition with
no rips or stains, and still looks brand-new coming out of the sailbag.
- Price: $300
- Contact: Rik Sneeuwjagt
- Phone: 410-414-5582
- E-mail: sneeuwjr@erols.com
- Photo:
C-22 / C-26 Storm Jib SOLD
- Year: 1986
- Location: Huntingtown, Maryland
- Features: I have a storm jib that has never been used. It was
made by Sails USA in Portland, Maine and comes complete with a sailbag. Here
are the dimensions: 40 square feet, 6.5 ounce dacron, hanks.
- Price: $50
- Contact: Rik Sneeuwjagt
- Phone: 410-414-5582
- E-mail: sneeuwjr@erols.com
- Photo:
Miscellaneous Parts for C-22
- Year:
- Location: Florida
- Features: I am parting out a C-22. I have everythng from the mast to
keel. I'm not trying to make a fortune off this. Simply submit what you want and
what you are willing to pay for the item. As long as it is fair, I will take it.
Also, I'm asking that you pay actual shipping, nothing more. The reason I am
doing this, I have 2 C-22's; one of which now really needs nothing and one I am
not using.
- Price: make offers
- Contact: Wes Cowart
- Phone: 904-619-1164
- E-mail: whcowart@mediaone.net
- Photo:
Brand New C-22 Main SOLD
- Year:
- Location: Idaho
- Features: Brand-new Main for a C-22. Made by Rolly Tasker Sails in
Florida. 5oz Dacron, Battens, One Reef, Tell Tales, Sail Bag Included.
- Price: $400
- Contact: Scott Hilpert
- Phone: 208-336-2726
- E-mail: hilpert1@home.com
- Photo:
C-22 Jib SOLD
- Year: 1979
- Location: Minnesota
- Features: I have a 1979 C-22 jib. It is in good condition, though
a little dirty. I assume that it is the original jib.
- Price: $150
- Contact: Janet Fisher
- Phone: 507-536-7118
- E-mail: Fisher.Janet@mayo.edu
- Photo:
C-18 Buccaneer Main Sail SOLD
- Year:
- Location: Minnesota
- Features: Main for Buccaneer - sail # 1388. Original. Been in my
garage since boat was stolen about 20 years ago. A couple of small patches.
The window in the sail is in sound shape.
- Price: $50/offer or trade for ??
- Contact: Eric Brindley
- Phone: 952-475-2771
- E-mail: ebrindley@sprynet.com
- Photo:
Parts for a C-16 "Musketeer" (catamaran)
- Year:
- Location: Michigan
- Features: Musketeer parts for sale: 29' musketeer mast and boom excellent cond. $150.00
musketeer main excl. $200.00; jib new $100.00; trampoline $25.00; rudders $50.00 pair; original chrysler trailer (fits musketeer) $200.00; misc hardware. +shipping.
- Contact: Bob Goeckel
- Phone: 810-736-2333 evenings
- E-mail: rgoeckel@usol.com
C-15 "Mutineer" Parts
- Year: 1974
- Location: Amarillo, Texas
- Features: I have a 1974 Chrysler Mutineer that I am parting out. I
don't know much about boats and the parts are cheap. Hurry, my wife wants the
boat gone in one month!! The boat is located in Amarillo, Texas - keep this
in mind if you want the mast, I don't quite know how to ship that!
- Price:
- Contact: Brett McLean
- Phone: 806-355-5646
- E-mail: Badman664@aol.com
- Photo:
Chrysler LS-13 "Lone Star" Sails
- Year:
- Location: Tallahassee, Florida
- Features: I have the original LS-13 sail package for sale. The set
consists of a main with logos and 3 battens; a jib; and a sail bag. All come
with the "Ratsey & Lapthorn, Inc. Sailmakers, City Island, NY" labels intact.
There are some minor stains and a one-inch tear on the main.
- Price: $500
- Contact: Dick Wroda
- Phone:
- E-mail: dwroda@webtv.net
- Photo:
Chrysler 150 Outboard Motor SOLD
- Year: 1978
- Location: Lincoln, Nebraska
- Features: 1978 Chrysler 150. The 6 hp motor was overhauled in 1998.
Runs good, looks good. Came off of a Chrysler C-20.
- Price: Motor and gas tank, $350 + shipping
- Contact: T.L. Sawyer
- Phone: 402-792-2183
- E-mail: Tsawyer@KGMnet.com
- Photo:
Winches & Accessories SOLD
- Year: 2000
- Location:
- Features: I'm selling the following new items. I bought them new
just last month and have decided that they're overkill for my little 18-ft
Seaward Fox. West Marine, Boat U.S, Defender and JSI list these items at
anywhere between $300-$375. Asking only $175 and will throw in free shipping.
--Two Andersen Model 6 Single-Speed Stainless-Steel Winches
--One Andersen 8" Stainless-Steel Locking Winch Handle
--One PVC Winch Handle Holder
- Price: $175
- Contact: Brian Sweany
- Phone: 317-842-6626
- E-mail: brian_sweany@yahoo.com
- Photo:
C-15 / C-18 Bailer Assembly SOLD
- Year: 1973
- Location: Georgia
- Features: Restore your broken bailer! I have one [1] original
Baylon Bailer Assembly in very good condition. The plastic insert is in very
good condition as well. $45 +shipping.
- Price: $45 + shipping
- Contact: Todd Bacon
- Phone: 770-889-1629
- E-mail: tbacon68@mindspring.com
- Photo: